Make sure refinement level is "High", check "Send to 3D Print Utility" checkbox to export directly to slicer, or uncheck it to save bodies as. Since you are exporting the whole component, and each component has bodies of the same color - this operation will export multiple bodies (of the same color) together into a single STL file. Right click on component and select "Save as STL" command: stl file, or send directly to the slicer (which is Simplif圓D in my case).
Once model is ready - you need to export it as. You can also embed overlay colors inside the base plate. Then I made 0.2 mm extrusions on top of it with black and red colors. I made 1 mm thick base plate assigning it a white color. If you have multiple areas of same color - group these bodies together into one component. You want to create standalone bodies for each individual color. You can print more complex and larger 3D models, but you will also need to make more filament changes manually. Because you are going to change colors (filaments) manually, it is best to use model with few color changes, such as flat signs or similar models. This guide will show you how you can use Simplif圓D to create multiple virtual extruders, assign a different color to each extruder and print multicolor model on single extruder 3D printer.įirst, you need a multicolor 3D model. What makes a multicolor prints possible is an option to pause, change filament and resume printing. The majority of FDM printers have a single extruder.
I was unable to find all necessary information, so I decided to make a guide. Multicolor prints without MMU / with single extruder using virtual extruders in Simplif圓D
0 kommentar(er)
